Department of Industrial Engineering Consulting

Kerman Shahab Niroo Consulting Engineering Co.(Moshanik)

Department of Industrial Engineering Consulting

The purpose of this department is to provide consulting services for the design, and engineering of equipment, supervision of the construction of facilities, and supervision of the implementation of industrial plant projects in the field of electricity and related fields (mechanical, civil, water, gas, air, etc.)

With the use of experienced personnel with more than 25 years of experience in project management and the use of 30 senior experts and professionals for design, engineering, and supervision constantly and according to the needs of the projects through the use of experts specialized by trained and professional personnel in the field of installation and commissioning of electrical equipment is ready, provide specialized services to complete the cycle of design, engineering of equipment, procurement, supervision of manufacturing in the factories of equipment, supervision of installation and commissioning and as-built drawings, and supervision of temporary and permanent handover of industrial projects in the form of industrial department of Kerman Shahab Niroo Engineers Consulting Company (Moshanik) is ready to provide relevant services.

Includes various units in three areas:

Industrial plant engineering
Studies on the system of industrial plants
Supervision the construction of industrial plants

Field of expertise Department of Industrial Engineering Consulting

Design and engineering of electrical systems for industrial plants

Construction supervision for the electrical system of industrial plants

Specialized consulting services in the field of electricity and supervision

We hope that by relying on God Almighty, we will be able to provide part of the services required by the industrial plants in a favorable manner.

Details of the design and engineering of the electrical system of industrial plants

Inspection of the design documentation of the owner of the technology of the main process of the industrial plant
Extraction of the values of electrical energy consumption in different parts of the industrial plant
Selection of the topology of the electric distribution network depending on the distribution of the loads concerning the geography of the industrial plant
Carrying out system studies on the upstream and downstream network of power supply to the plant
Carrying out the technical steps for the procurement of electrical equipment under the technical specifications for such equipment

Overview of the design and engineering of electrical systems for industrial plants

Study of the design documentation of the owner of the technology of the main process of the industrial plant
Extraction of the values of electrical energy consumption in different parts of the industrial plant
Selection of the topology of the electrical distribution network according to the distribution of the loads concerning the geography of the industrial plant
Carrying out system studies concerning the upstream and downstream network of the plant’s electricity supply
Carrying out the technical steps for the procurement of the electrical equipment according to the technical specifications required for this equipment

Technical and professional requirements in the field of electricity for the construction of large industrial plants

Kerman Shahab Niroo Consulting Engineering Co.(Moshanik)

Determination of the level of insulation of the electrical equipment depending on the environmental conditions and the height of the construction site of the plant
Signature and confirmation of technical specifications of electrical equipment introduced by the owner of the technology or the employer
Procurement engineering and preparation of procurement requests by identifying technical specifications of equipment or systems, including specifications and data sheets
Collecting and preparing test instructions for equipment according to international standards such as IEEE, IEC, etc. provided by internationally recognized laboratories such as KEMA, CESI, KERI, ICMET, CPR as well as E.P.I.L
Testing of the equipment and preparation of technical reports on the results of the relevant tests and approval or non-approval of the equipment manufactured in compliance with the standards and technical specifications.

Receiving the list of items related to industrial automation and instrumentation systems from the owner of the technology for major industries or submitting proposals to employers regarding the selection of the type of system and related equipment.
Determining the brand of automation equipment and selecting control and monitoring software according to the nature of processes and prevailing conditions for the use of technology provided by the technology owner is of great importance.
Investigation and testing, as well as providing solutions for the selection of the data transmission network infrastructure in the context of industrial automation and public data network

Description of the design and engineering services that can be provided

Kerman Shahab Niroo Consulting Engineering Co.(Moshanik)

Preparation of tender documents

Cost estimation and preparation of a list of electrical equipment, control systems, and instrumentation for industrial plants
Preparation of plans for the arrangement of equipment in buildings, considering process requirements as well as ancillary needs such as water, electricity, fuel, and communications in a variety of industries and factories.
Prepare and design technical documents for bidding and drafting of design, procurement, and implementation contracts.

Basic, detailed, and review technical studies and designs in the fields of industrial plants and energy

Design of medium voltage overhead transmission lines and cables for the distribution network of industrial plants at voltage levels 6.9 – 20.33 kV, including the design of duct banks, trenches, foundations, metal structures, conductors, fittings, arresters, etc.
Design and calculations of medium-voltage distribution substations at voltage levels 609, 20, and 33 kV
Design and calculations of low voltage distribution and consumer networks at voltage levels 220, 400, and 670 V in industrial plants
Preparation of SLD and calculations related to switchgear for industrial plants
Preparation of load list and selection of drive equipment according to the plan of the owner of industrial facilities
Sizing and coordination calculations of electrical loads of industrial plants with the upstream distribution network.
Preparation of tables of technical specifications for electrical equipment (database) for input into software for system studies for industrial plants.
Design and perform calculations for sizing bus loads, cables, fuses, and relays according to the type of electrical loads such as electric motors, transformers, chokes, drives, soft
Study and calculation of DC power consumption for protection and control systems, switchgear and MCCs
Battery sizing calculations and selection of batteries and chargers
Grounding calculations and selection of the type of protective grounding system for industrial installations
Studies to determine the level of insulation of industrial installations depending on the environmental conditions
Sizing and studies to determine the technical specifications of the main equipment of industrial plants, including the selection of the technical specifications of transformers, generators, electric motors, capacitors, cables, breakers, disconnectors, and busbars
Studies for the selection of protection, control, and monitoring systems for the main equipment of industrial plants, such as motor management, transformer management, generator management, feeder management, etc.
starters, etc.

Technical studies and consulting for the selection of automation systems and industrial precision instruments

Sensors and instruments for measuring pressure, temperature, flow, level, density, analyzers, and all kinds of transducers.
Industrial PLCs in different sizes and types
Industrial controllers for control loops
Design selection of DCS systems
Design and selection of HMI software based on process requirements

Specialized consulting services and supervision in the electricity sector

Short circuit study to determine the maximum and minimum short circuit values
Load flow study, harmonic study
Performing calculations to determine the setting of protective relays
Performing relay coordination calculations
Performing motor starting studies
Performing cable ampacity calculations

Specialized consulting services and supervision in the electricity sector

Preparing and designing single-line plans of switchboards at various voltage levels
Configuration and test of ABB protection relays (SIEMENS, AREVA, GE, etc.)
Installation and operation of all LV and MV drives and motors
Consulting in the field of LV and MV drives and motors
Provision of spare parts for drives and motors
Design, calculation, execution, and testing of earthing and lightning protection systems under the applicable standards
Design, calculation, and execution of capacitor banks, batteries, and battery chargers
Studies and designs for hazardous environments and the preparation of a certificate for hazard studies for the industrial plant
Sizing, installation, and operation of low and high speed diesel generators
Calculation, design, and implementation of CCTV systems
Calculation, design, and implementation of paging systems and telecommunications
Calculation and design of a cathodic
Design and calculation of an industrial data transmission network
Preparation of the design and selection of suitable topologies and associated protocols for the data transmission network of SCADA systems and automation of production, distribution, and power consumption networks of large industrial plants
Selection, installation, and commissioning of appropriate measuring equipment for measuring power quality and other electrical parameters at consumers and power generators, power plants, and power distribution networks of industrial plants
Selection, installation, and commissioning of IED (Intelligent Electronic Device) in a large production, distribution, and consumer network for monitoring, measurement, and maintenance of these facilities.
Study for the optimization of energy consumption
Studies related to the implementation of an energy management system in industrial plants
Studies related to the emergency power requirements of the process and the provision of emergency power to industrial plants
Studies related to load shedding and the selection of the appropriate method of load shedding for industrial plants
protection system

Ability to use a variety of electrical engineering calculation software with the assistance of professionals in the following fields

Kerman Shahab Niroo Consulting Engineering Co.(Moshanik)

ETAP

سبا

Digsilent

Cyme(cyme dist,cap)

Matlb

Pspice

Protel

Orcad

PVsyst

Arc GIS

Ability to work with application software for control, protection, and automation of electrical substations and SCADA systems of the power grid as follows:

Kerman Shahab Niroo Consulting Engineering Co.(Moshanik)

GE_NESIS

View pont

Subnet

Ion Enterprise

Survalent

SNS

Simatic net

Zenon

Ion Enterprise

Ability to work with all types of protection relays and meters of different brands and software related to their PROGRAMIND and associated protocols, as follows:

Siemens, ABB,Vamp,GE,...

ION, Power management,…

ion, lon, IEC61850 , IEC104, IEC103, IEC101, softnet

Ability to implement power grid management systems, including:

PDCS

PMS

GIS

Ability to work with mechanical software

HYSYS

HAP

HYPROTECH

CHP TOOLS

Description of the design and engineering services that can be provided

Kerman Shahab Niroo Consulting Engineering Co.(Moshanik)

Description of general services of power plants with distributed generation (DG) Renewable power plants, CHP & cogeneration, thermal, small electric and etc.

Feasibility and economic studies
Grid connection studies
Electrical and grounding protection system studies
Basic engineering design, identification of technical requirements and technical specifications, and provision of required documents and drawings
Participation in tendering procedures

Description of services for the design of distribution network

Design of the distribution network of large industrial plants
Studies and calculations of the needs of the different parts of the industrial plant
Network design using electrical engineering study software (ETAP, Digsilent, Cyme) and load flow, short-circuit, and motor start studies
Basic studies and design of the earthing system
Basic studies and design of electrical protection system
Basic studies and design of control, automation, and SCADA systems
Preparation of the required technical documentation and drawings based on the studies performed
Definition of specifications for substations and cables or overhead lines
Participation in tendering procedures
Design of urban distribution networks
Studies and calculations on the projected growth of demand and load in the periods of 5, 10, 15, and 20 years
Optimal placement of substations and adaptation to real conditions through site visits
Design of medium and low voltage networks using electrical engineering study software, load flow, and short circuit calculations
Determination of technical specifications for the components of the power distribution network
Participation in tendering procedures

Optimization of distribution networks
Site visits and collection of information on the existing network
Network simulation with software for electrotechnical studies
Provision of technical plans and documents for the modification and optimization of the network according to the results of the technical study
Description of services for photovoltaic solar power plants (utility scale)
Consulting services for primary studies
Determination of sites suitable for the construction of the project; these sites depend on the geographical location, climate, and the location of the power grid in their vicinity
Investigate the capacity of the power plant that can be connected to the power grid in the vicinity of the proposed sites and negotiate with the regional/distributor electric utility for connection to the power grid in the vicinity of the proposed site.
Determine the appropriate and optimal capacity of the solar farm, estimate the annual electricity production at the site, and prepare economic studies including the amount of investment, return on investment, etc. using RETScreen software.
Consulting services for obtaining the first permits
Registration on the Satba website, participation in the process of obtaining a qualification permit, and obtaining an initial permit
Correspondence with the Department of Natural Resources and obtaining a license to use the proposed site
Correspondence with the Department of the Environment and obtaining a license to operate the proposed solar farm
Correspondence with the Regional Electric Company to obtain grid information about the project construction site
Consulting services to conduct grid connection plan studies
Designing the internal structure of the power plant according to the type of switchboards and inverters used in the project;
Obtaining information about the studied power network in coordination with the experts of the power company of the studied area;
Modeling of the studied grid in the DIgSILENT software environment;
Identifying possible alternatives for connecting the generator to the network modeled in the DIgSILENT software environment;

03432455970

No 11 Alley, Bahrol Oloom St., Bahonar satellite town, Kerman, Iran